Description
Hike Ultra 15W40 CI4 series is a range of high-performance diesel engine oils formulated with highly refined Synthetic base stocks and advanced technology additives to provide reliable performance in the latest emission designs, including those with EGR systems, as well as satisfying the needs of older engines. It may be used in naturally aspirated and turbocharged diesel and petrol engines, providing excellent protection even under the most strenuous conditions.
Features & Benefits
- Outstanding thermal & oxidation stability helps in extending life of oil and filter.
- Excellent water separability reduces sludge build up in crankcase and discharge lines.
- Low ash and carbon formation improves valve performance and reduces potential for fire & explosion.
- Excellent load carrying properties reduces wear of rings, cylinders, bearings and gears.
- Excellent protection from rust and corrosion of multi-metallurgy compressor components.
Specifications
- Hike Compressor AR series meets or exceeds following International and Builder specifications:
- DIN 51506 VD-L
Application
Hike Compressor AR series are suitable for use in Reciprocating and Rotary compressors, upto maximum compressed air temperature of 220 °C.
- Reciprocating air compressor crankcase & cylinders and Rotary screw & vane compressors.
- Axial and centrifugal compressors with critical gears and bearings.
These oils are not intended or suitable for use in air compressors for breathing applications.
Typical Characteristics
Hike Compressor AR series
|
Test Method
|
Units
|
46
|
ISO Viscosity Grade
|
ISO 3448
|
-
|
46
|
Density @ 15°C
|
ASTM D 4052
|
gm/cc
|
0.878
|
Viscosity@100 °C
|
ASTM D 445
|
cSt
|
6.78
|
Viscosity@40 °C
|
ASTM D 445
|
cSt
|
46.8
|
Viscosity Index
|
ASTM D 2270
|
-
|
98
|
Pour Point
|
ASTM D 97
|
°C
|
-27
|
Flash Point (COC)
|
ASTM D 92
|
°C
|
230
|
Ignition Point
|
ASTM D 92
|
°C
|
235
|
Copper Strip Corrosion
|
ASTM D 130
|
-
|
18
|
Rust Characteristics Proc B
|
ASTM D 665
|
-
|
pass
|
Neutralization Number
|
ASTM D 974
|
KOH/g
|
<0.05
|
Foam Seq I,II,III
|
ASTM D 892
|
ml/ml
|
10/0
|